Tap Menu > Device Config
Configure IPC and IPC channel, NVR and NVR channel remotely.
- Single-channel IPC: Set time, sound volume, alarm sound, video compression, OSD, PTZ Rectification (only IPC67XX models support configuration), disarming, smart illumination, WDR, day/night mode, motion detection, human body detection, auto tracking, cross line detection, intrusion detection, enter area, leave area, SD card, device restart.
- Multi-channel IPC: Set time, sound volume, disarming, alarm sound, device restart.
- IPC channel: Set smart illumination, day/night mode, video compression, OSD, PTZ Rectification (only IPC67XX models support configuration), motion detection, human body detection, auto tracking, cross line detection, intrusion detection, enter area, leave area.
- NVR: Set time, disarming, overwrite when storage is full, recording schedule, device restart.
- NVR channel: Set the camera name, sound volume, alarm sound, disarming, smart illumination, motion detection, human body detection, cross-line detection, intrusion detection, enter area, leave area, and recording schedule.
Storage Policy
Turn on or off Overwrite When Storage Full:
On: When the storage on the IPC’s SD card or NVR’s HDD is full, recording continues, and the old video is overwritten by the new video.
Off: Video recording stops when storage is used up on the SD card or HDD.
Recording Schedule
Configure a recording schedule so the NVR stores video of cameras according to the schedule.
- Select camera(s).
- Set recording type. Motion detection video is a video clip recorded around the time when a motion detection alarm occurs. By default, it is 70 seconds long (10s before and 60s after the alarm time).
- Set recording time: Choose a day(s) of a week to record the video.
- Tap to save the settings.
Restart Device
Tap to restart the IPC/NVR.